Wednesday, June 25, 2008
March-June Recap
Tuesday, June 24, 2008
Delta-Dry Systems
For over 40 years, high quality products have been produced under the DELTA® brand name, always offering top levels of protection, reliability and energy conservation.This is the achievement of a company operating on an international scale with an exceptional team of highly motivated people.Cosella-Dörken Products Inc. is an autonomous subsidiary of Ewald Dörken AG (Germany), that has been a market leader for the building and construction industry in Europe for many decades.The company’s array of products includes foundation waterproofing and protection membranes, drainage systems, roofing membranes, weather resistive barrier membranes and building envelope systems, covering and scaffolding tarpaulins, garden sheets, pond liners, and more. The DELTA® brand also includes highly sophisticated paint systems and anti-corrosion systems, as well as phase changing materials for passive air conditioning in residential and commercial construction.
Material
DELTA®-DRY is an impermeable membrane made out of a special high-density polyethylene that provides two-sided drainage through its unique dimple and groove design.
Product Characteristics
The structured membrane provides a protective weather resistive barrier with complete capillary break for residential and commercial building structures. It protects the building from water intrusion behind the exterior cladding (i.e. wind driven rain) and manages water leakage through the cladding as well as transient moisture migrating from the wall structure by providing an air-gap on the interior and exterior side of the membrane
Shown below behind brick
DELTA®-DRY accommodates water vapor, driven from the interior to the exterior of the structure to escape through the air space between the exterior sheathing board and the membrane while minimizing the potential for condensation that could cause damage in the building envelope.The membrane provides breathability behind siding, brick veneer, or any other approved exterior cladding. At the same time it impedes solar-driven moisture towards the interior of the structure as it occurs for instance with brick veneer walls, or any other absorptive cladding material.
Shown below behind stucco
The innovative membrane also helps to save energy by reflecting radiation heat – keeping heat outside in the summer and warmth inside in the winter
Shown below behind cultured stoneApplication
DELTA®-DRY is installed on top of the exterior sheathing board (OSB) as a substitute for conventional sheathing membranes (i.e. building paper), or can also be installed on top of breather type sheathing membranes. The material is easy to cut with a utility knife. Seems are to be overlapped around 3 inches. Window and door cut-outs are to be wrapped with a self-adhesive flashing material along the bottom sill and the side jambs. Exterior cladding material can be installed as usual right on top of DELTA®-DRY. For more details please check the installation instructions.
Check out Delta's other products for different applications:
Foundation Waterproofing/ Drainage - Residential
Foundation Waterproofing/ Drainage- Commercial & Civil
Underlayment for Concrete Basement Floors & Slabs on Grade
Roof Underlays and Building Envelope Systems
Phase Changing Materials: Smart Temperature Management
Give us a call so we can help you order the product that best fits your project needs!!
Camosse Masonry Supply Charlton:
(508) 248-4044 ask for Jay
Camosse Masonry Supply Worcester:
(508) 755-6193 ask for Chris
Monday, June 23, 2008
ICC Flowtech
Their products are tested to be used with minimal disruptions to surrounding landscaping and lawns. Their system is lightweight and replaces gravel and stones with a heavy duty EPS aggregate with engineered channels for excellent flow.
By using ICC Flowtech™ systems the excess water is redirected and redistributed back into the soil.
ICC Flowtech™ systems contain no fines. Gravels systems contain excessive fines from the mining operation. These fines prematurely clog the trench bed and reduce the effectiveness of your system. ICC Flowtech™ Systems have five times the flow rate of gravel systems. Their Technical info proves it!
Properties:
-Heavy Duty
-High Flow Channels
-Consistent Shape
-Reduced Labor
-Reduces the threat of mold and mildew
-Easily installed to conform to any configuration
-Redistributes the excess/surface water and returns it to the Aquifer
-Each 10' unit has the capacity to hold up to 30 gallons of water and quickly/efficiently distributes back into the soil.
ICC Flowtech can be used in a variety of applications like:
Foundation Drain, Landscaping, Swimming Pools, Retaining Walls, Golf Courses, Sump Pump Drains, Septic Systems, & Storm Water Drains.
Call us now and order yours today!!
(508) 248-4044 and ask for Jay
(508) 755-6193 and ask for Chris
Remember, Camosse Masonry Supply is your one-stop shop for all your project needs!!
Thanks for visiting!
Cape Cod & the Islands Source for Natural Stone
Thursday, June 19, 2008
Go Celtics!!
Camosse Masonry Supply is a supporter of all New England Sports teams. A congratulations is in order for the newest NBA Champions, Boston Celtics!! Go Celts!!
Get your Celtics, Bruins, Red Sox & Patriots Garden/Wall Accents here!!
Great as a late father's day gift or to showcase your favorite New England Team in your landscape or garden!
Massarelli's Fine Stone & Garden Accents
Massarelli's has been in business since 1972. They are a first generation business continuing to serve the United States and Canada with a friendly family-owned style. Massarelli's still finishes each and every piece of ornamental stone statuary by hand. Massarelli's takes enormous pride in offering the finest quality materials and designs.
At Camosse Masonry Supply, we do not regularly carry these items in stock. However, if you see something you like, we can order it upon request and give you ideas on how to incorporate your piece into any new or existing project.
Our staff is here to help YOU!
Give us a call at either of our two locations:
Charlton: (508) 248-4044
Worcester: (508) 755-6193
Thanks for visiting!!!
Wednesday, June 18, 2008
UMACO
Manufacturers and Distributors of:
Cement-Based Waterproof Coatings & Stucco Systems
U-SEAL
A cement-based, waterproof coating applied by brush or spray over properly prepared, vertical masonry and concrete surfaces. U-Seal creates a permanent waterproof barrier which prevents moisture migration. An ideal coating to use for waterproofing interior/exterior foundation walls. Designed to be mixed with Add Mix-35.
U-TROWEL
A cement-based, waterproof, stucco (traditional) applied by trowel over properly prepared masonry and concrete surfaces. One coat produces a high density finish which may be applied in a wide variety of textures. Designed to be mixed with Add Mix-35 or Add Mix-35 Colors.
A cement-based, fiber-reinforced basecoat for U-Trowel applied by trowel over a variety of surfaces (including metal lath). Designed to be mixed with Add Mix-35.
STYROCOAT
A cement-based, polymer-modified basecoat for synthetic stucco finishes (Umaco Finish-Coat). Applied by trowel, Styrocoat embeds fiberglass reinforced mesh fabric over expanded polystyrene insulation board (EPS) and cement board. Styrocoat may also be used to adhere EPS to vertical concrete, masonry and exterior grade plywood surfaces.
FINISH-COAT
A 100% acrylic-based, aggregate-textured, synthetic stucco applied over properly prepared expanded polystyrene insulation board, cement board, concrete, masonry, exterior-grade plywood, plaster and stucco surfaces. Finish-Coat is ready to use and is available in a variety of colors.
Flooring Underlayment & Surfacers
ACRYLFLEX FINE
A cement-based, high-density, patching, topping and underlayment material applied by trowel from a feather-edge up to 1/4”. Designed to be mixed with Add Mix-21.
ACRYLFLEX REGULAR
A cement-based, high-density, patching, topping and underlayment material applied by trowel from 1/8” up to 3/4”. Designed to be mixed with Add Mix-21.
FLASH-PATCH
A fast-setting (20 minutes), cement-based, polymer-modified, patching and leveling material applied by trowel over concrete, masonry and plywood surfaces for applications up to 1/2”.
LEVEL-QUICK
A fast-setting (15 minutes), interior-grade underlayment material used to smooth imperfections in a variety of surfaces such as pitted concrete, knot holes, cracks, nail holes and seams in wood sub floors.
SELF-LEVELER 4000
A cement-based, polymer-modified, self-leveling, resurfacing compound that can be poured or pumped over a variety of uneven, properly prepared surfaces from a featheredge up to one inch in a single pour.
FEATHER-EDGE
A fast-setting (20 minutes), cement-based, polymer-modified compound used to smooth interior surfaces from 1/4” down to a true feather-edge prior to the installation of a variety of floor coverings such as ceramic tile, VCT, sheet vinyl and carpeting.
Patching, Repairing & Anchoring
U-PATCH
A fast-setting (6-10 minutes), cement-based, non-shrink material designed to repair all types of vertical and horizontal concrete and masonry surfaces. Designed to be mixed with Add Mix-21.
VHO PATCH
A fast-setting (15-20 minutes), cement-based, polymer-modified material designed to repair vertical, horizontal and overhead concrete and masonry surfaces up to two inches thick in one application.
VINYLCRETE
A cement-based, polymer-modified, waterproof material used to patch holes up to 1-1/2” deep, smooth uneven and pitted concrete and repoint all types of masonry.
U-PLUG
A fast-setting (5-10 minutes), non-shrink, hydraulic cement designed to instantly stop running water from seeping through holes and cracks found in masonry and concrete.
TITE-ROC
A fast-setting, pourable, expanding, hydraulic material designed for anchoring fixtures in concrete and masonry.
NON-SHRINK GROUT
A non-shrink, high strength, non-metallic cementitious grouting compound which may be poured or troweled when used for a variety of anchoring and patching applications.
ROAD PATCH
A fast-setting, cement-based, highway patching compound and overlayment material used to restore concrete substrates requiring a minimum build-up of 2 inches. Ready for rubber wheeled traffic in 60 minutes.
Mortars & Adhesives
THINSET MORTAR
A cement-based, bond coat used to set all types of tile over properly prepared horizontal concrete and masonry surfaces.
MULTI-PURPOSE TILE MORTAR
A cement-based, polymer-modified mortar designed for setting tile over masonry, gypsum board, exterior grade plywood and other properly prepared surfaces. May be used on horizontal or vertical surfaces for exterior and interior applications.
GLASS BLOCK MORTAR
A high strength, polymer-modified, waterproof mortar designed for setting a variety of decorative glass block.
MANUFACTURED STONE MORTAR
A durable, polymer-modified mortar designed to provide optimum bond when installing a variety of manufactured stone veneers over properly prepared substrates.
BLOCK-LOCK ADHESIVE
Provides a strong, durable bond when installing caps to block retaining walls in a wide range of temperatures. May also be used to adhere brick pavers (horizontally) to concrete surfaces. Easy to apply with a standard caulk gun.
SURFACE BONDING CEMENT
A cement-based, fiber-reinforced, polymer-modified, waterproof coating designed to be applied by trowel over dry stacked concrete block, rigid insulation board, masonry and concrete surfaces.
Acrylic Admixtures, Bonding Agents & Additives
ADD MIX-21
An acrylic, liquid additive (21% solids) for cement based mixes designed to increase adhesive bond as well as tensile and flexural strength.
ADD MIX-35
An acrylic, liquid additive (35% solids) for cement based mixes designed to increase adhesive bond as well as tensile and flexural strength.
ADD MIX-35 COLORS
An acrylic, liquid additive for U-Trowel designed to provide color and increase adhesive bond as well as tensile and flexural strength.
BOND ALL EXTERIOR
A brushable, water-based, exterior-grade bonding agent designed to be applied to the substrate prior to applying cement based and gypsum mixes.
BOND ALL INTERIOR
A brushable, water-based, interior-grade bonding agent designed to be applied to the substrate prior to applying cement based and gypsum mixes.
ACT FIBERS
Alkaline resistant fibers which help reinforce against plastic shrinkage crack formation when added to cement-based and gypsum-based mixes.
COLD CHECK
A chloride-based, liquid admixture designed to accelerate the set time of concrete and mortar mixes in cold weather applications.
NON-CHLORIDE MORAT ACCELERATOR
New Product!
Waterproofing, Masonry Sealers & Coatings
SILOXANE 12
An exterior-grade, clear, deep-penetrating, solvent-based water repellent (12% solids) applied over untreated masonry and concrete surfaces.
SILOXANE 20
An exterior-grade, clear, deep-penetrating, solvent-based water repellent (20% solids) applied over untreated masonry and concrete surfaces.
TRANSEAL
An exterior-grade, solvent-based acrylic sealer applied over properly prepared masonry and concrete surfaces. Transeal forms a durable, flexible film which provides long lasting protection. Transeal is available in Clear (Gloss or Matte) and in a variety of colors.
TRANSEAL WB
An interior/exterior, durable, waterborne acrylic sealer applied over properly prepared masonry and concrete surfaces. Transeal WB is low odor making it an ideal sealer to use for interior applications. Transeal WB is available in Clear (Gloss) and in a variety of colors.
ELASTOFLEX
A flexible, stretchable, waterborne acrylic, elastomeric coating which waterproofs and decorates exterior stucco, masonry and concrete walls. Elastoflex bridges hairline cracks and will stretch and move with the expansion of the building. Elastoflex is available in a variety of colors.
Concrete Cures, Sealers, & Maintenance Products
CONCRETE CURE & SEAL
A waterborne, acrylic emulsion designed to cure, seal, harden and dustproof concrete. Applied after finishing, Concrete Cure & Seal forms a membrane that retains mix water, allowing normal hydration. May also be used to dustproof and seal aged concrete.
CONCRETE CURE
A cost effective, dissipating, resin emulsion, curing compound which properly cures concrete helping reduce the risk of scaling when applied after finishing.
CFS (CONCRETE FLOOR SEALER)
A solvent-based, acrylic sealer designed to be applied over properly prepared concrete and masonry driving surfaces that require hot tire resistance. Available in Clear (Gloss) and in a variety of colors.
Sealants (Caulking & Brushable)
ELASTOMERIC SEALANT CAULK
A high performance elastomeric caulk which adheres to masonry, wood, asphalt, metal and vinyl for use in a wide variety of roofing and general construction applications. May be applied to damp or oily surfaces in a wide range of temperatures. Easy to apply with a standard caulk gun. Available in eight standard colors.
ULTRA-SEAL
A clear, brushable, rubber like sealant for use in a wide variety of general construction and roofing applications. Ultra-Seal adheres to masonry, concrete, wood, asphalt and metal surfaces. May be applied to damp or oily surfaces in a wide range of temperatures.
MORTAR JOINT REPAIR
A siliconized, water-based, acrylic sealant caulk (gray in color) designed to repair cracks in mortar joints and other cementitious surface. Easy to apply with a standard caulk gun.
MELT-N-GRIP
A convenient blend of magnesium chloride and traction sand used to control snow and ice on walks, driveways and stairs.
Umaco products have been widely used and trusted by Professional Contractors for over 40 years.
Tuesday, June 17, 2008
HOW TO CONTACT US
We have two convenient locations in Charlton and Worcester to serve all of Massachusetts.
Our delivery trucks allow for on site delivery and our skilled sales staff can assist you with any scale project.
Camosse Masonry Supply
61 Southwest Cutoff
Worcester, Ma 01604
508.755.6193 phone
508.792.5672 fax
hcamosse@camosse.com
Camosse Masonry Supply
23 Trolley Crossing
Charlton, MA 01507
508.248.4044 phone
508.248.4047 fax
ohenryiii@msn.com
Thanks and we'll see you soon!
SRW Geogrid
Contact us today for all your Geogrid needs. We can also refer you to local engineers for proper wall design and geogrid placement. We recommend geogrid on all walls 48" and above and recognize that any height wall may need geogrid based on site conditions.
SRW Retaining Wall & Paver Adhesive
SRW Retaining Wall & Paver Adhesive is the strongest adhesive of its kind. Professionals depend on it for its superior strength and time-tested performance. It is formulated especially for masonry, concrete, brick, block, pavers and common landscping materials. It can be used for bonding frozen, damp surfaces. It exceeds requirements for APA Specification, AFT-01 and ASTM D3498.
Product Information
• Ideal for brick, pavers, masonry and concrete
• Professional strength adhesive
• Use on wet or frozen surfaces
• Provides a strong, durable bond
COVERAGE: Approximate length of bead according to container size and bead diameter.10.5 oz cartridge = 1/4" bead, 32 ft; 3/8" bead, 14 ft29 oz cartridge = 1/4" bead, 89 ft; 3/8" bead 35 ft.
WORKING TIME: Due to the fast-drying characteristic, once opened use within 30 minutes for 1/4" bead or reseal immediately.
User Tips
1. If block, paver, etc., has been tumbled, make sure surface is clean of dust, dirt or material that may deter proper adhesion. Use a 3/8" bead on tumbled products.
2. Best if applied at temperatures above 10º F.
3. Allow 48 hours cure time and 4-5 days after application for heavy traffic.
4. If materials have grooves, make sure you have full positive connection of adhesive to both surfaces.
5. Not made for continuous submersion or use below the waterline.
6. Vertical or slanted applications may require additional bracing until adhesive has dried.
7. Do not smear adhesive or apply with a trowel, due to the fast-drying characteristics.
8. This product is not recommended for fiberglass, rubber, plastic (or like materials).
9. Storage life: More than 12 months in tightly closed container at 75ºF. Do not store in direct sunlight.
Monday, June 16, 2008
Hitching Posts
Charlton: (508) 248-4044
Isokern Fireplaces & Chimney Systems
The pumice stone that is used in all Isokern products is a relatively new resource being excavated in approximately 2500 year old mines that are located near the polar circle. Due to such high quality resources, the aggregate is very clean, pure and exhibits very fine qualities as opposed to other volcanic material in lower latitudes which are full of organic material.
Today, Isokern satisfies two continents with exceptional lightweight products for residential, commercial and industrial uses. The Isokern brand is more established than ever and is becoming a well known product line among builders, developers, architects, designers and homeowners.
Isokern systems are modular, masonry systems that can be assembled and installed in under a day. Unlike traditional masonry units that can take weeks or months to complete, an experienced installer can install several Isokern systems in a day.
As mentioned, Isokern systems are manufactured from volcanic pumice. This make-up allows the fireplaces and chimney systems to reflect heat more efficiently and have higher insulation values compared to other alternatives in the marketplace.
Isokern systems can be custom finished to satisfy homeowner, builder or interior design needs.
Quikrete
Thursday, June 12, 2008
New Stock for June
Native New England Fieldstones are collected and salvaged from Stone of New England and sold exclusively at Camosse Masonry Supply.
We have the ability to supply custom packaged New England stone for your specific needs.
There's no job to small.
Our skilled staff can help you determine the best stone for any landscape or masonry project.
These are new pallets of Hardwick Rounds. This is a very dense naturally round stone. Ideal for the edges of natural water features and New England Fieldstone walls.
Fresh in from South Central Massachussets is our New England Yankee Wall. The Yankee wall has heavy brown and tan tones with heavy weathering. These pallets have been palletized as a flat round mix. The weight per pallet is approximitaly 3500lbs.
We have enough stone for any project and can provide onsite delivery and placement with the use of our rear mounted forklift. This is a low impact machine operated by a skilled driver. Don't break your back before the project even starts.
New England Garden Path is sorted for its larger flatter surface areas. This stone was found in Connecticutt and in limited supply. All of our Garden Path stones are sold by the pound so you can buy exactly what you need.
The Quabog Vallet Veneer is a beautiful example of ledge stone that has been worn by the glaciers of the past.
This naturally smooth stone is available in Mosaic Veneer and Thin wall. The pallets are 2500 lbs and a great example of a water garden stone. Buy this stone by the pound or pallet today!
No matter how big or small your project is our skilled staff is there for you. To make the most of your trip make sure to bring drawings, measurements, photos or examples of materials your trying to match.
Our staff will get right to business with estimates and samples and get you the most for your money. You can't get this help at any box stores!
Wednesday, June 11, 2008
Better Business Bureau
Camosse Masonry Supply is a proud member of the Better Business Bureau of Central & Western MA. We have been a BBB Accredited business since November 1963.
BBB is an unbiased organization that sets and upholds high standards for fair and honest business behavior. Businesses that earn BBB accredited business status contractually agree and adhere to the organization’s high standards of ethical business behavior. BBB provides objective advice, free business Reliability Reports and charity Wise Giving Reports, and educational information on topics affecting marketplace trust. To further promote trust, BBB also offers complaint and dispute resolution support for consumers and businesses when there is difference in viewpoints. The first BBB was founded in 1912. Today, 128 BBBs serve communities across the U.S. and Canada, evaluating and monitoring more than 3 million local and national businesses and charities.
Check out our Report!!
Tuesday, June 10, 2008
Camosse Masonry Supply is proud supporter of The Builders Association of Central Massachusetts . BACM is a non-profit trade association with a membership that represents over 250 companies such as builders, carpenters, tradesman, suppliers and other related professions involved in the construction, development and remodeling of single family homes in the 43 towns in central Massachusetts.
To qualify for membership, the applicant must have their references checked and applications scrutinized before being voted into the organization.
The BACM supports its members with educational programs & presentations regarding the building industry, on education regarding legislative matters that affect the home building industry and with monthly networking opportunities.
Thursday, June 5, 2008
Pictured above is Corinthian Granite Thin Wall stone. This material comes in 3,000-3,500lb. pallets. It's available in Heavy Wall, Veneer, and Flagging. Thin Wall is sold at $280/ton.
Pictured above is Pennsylvania Thin Fieldstone 1"-3" size. It's sold in 3,000lb. pallets and it's great for walls. Only $240 per pallet!!!!
Lastly, pictured above is Southbay Quartz Thin Wall Stone. It's sold in 3,000-3,500lb. pallets. It too is available in Heavy Wall, Veneer, and Flagging. Thin wall is only $260/ton.
Wednesday, June 4, 2008
Pavers, Pavers Everywhere!!
The appeal of this paver is its timeless warmth and beauty. With its antiqued, tumbled finish, it's a one-of-a-kind paver that reflects the design dues of age-worn cobblestone. Each piece has irregular edges, complementing the timeworn character of the paver surface. The result is a finished design that will feel both classic and relaxed.
An unusual stone with inimitable charm, Antika pavers are like snowflakes: no two are exactly alike. Antika paving stones give walkways and patios the allure of an ancient cobblestone courtyard, and can stand alone or be outlined by a beautifully sculpted curbstone.