SRW Retaining Wall & Paver Adhesive

SRW Retaining Wall & Paver Adhesive is the strongest adhesive of its kind. Professionals depend on it for its superior strength and time-tested performance. It is formulated especially for masonry, concrete, brick, block, pavers and common landscping materials. It can be used for bonding frozen, damp surfaces. It exceeds requirements for APA Specification, AFT-01 and ASTM D3498.

Product Information

• Ideal for brick, pavers, masonry and concrete

• Professional strength adhesive

• Use on wet or frozen surfaces

• Provides a strong, durable bond

COVERAGE: Approximate length of bead according to container size and bead diameter.10.5 oz cartridge = 1/4" bead, 32 ft; 3/8" bead, 14 ft29 oz cartridge = 1/4" bead, 89 ft; 3/8" bead 35 ft.

WORKING TIME: Due to the fast-drying characteristic, once opened use within 30 minutes for 1/4" bead or reseal immediately.

User Tips

1. If block, paver, etc., has been tumbled, make sure surface is clean of dust, dirt or material that may deter proper adhesion. Use a 3/8" bead on tumbled products.

2. Best if applied at temperatures above 10º F.

3. Allow 48 hours cure time and 4-5 days after application for heavy traffic.

4. If materials have grooves, make sure you have full positive connection of adhesive to both surfaces.

5. Not made for continuous submersion or use below the waterline.

6. Vertical or slanted applications may require additional bracing until adhesive has dried.

7. Do not smear adhesive or apply with a trowel, due to the fast-drying characteristics.

8. This product is not recommended for fiberglass, rubber, plastic (or like materials).

9. Storage life: More than 12 months in tightly closed container at 75ºF. Do not store in direct sunlight.